|
TIMP320 |
TIMP640 |
Remark |
Resolution(Pixels) |
384×288 |
640×480 |
|
Spectral response |
8-14µm |
Un-cooled LWIR micro-bolometer |
Thermal Detector |
Pixel Pitch |
17µm |
|
Thermal Sensitivity (NETD) |
<50mK @f1.0, 30Hz, 300K |
<50mK @f1.0, 30Hz, 300K |
Shutter-less compatible |
Operating temperature (ambient temperature) |
-10℃ to 60℃
(Installing thermal cameras inside housing with built-in fan and heater to keep inside temperature in a certain range, for example, 15 to 25℃, is recommended for use in out of operating temperature range for accuracy in measurement) |
Accuracy of ± 2℃ or ±2 % of reading: only when camera is in the range of ambient temperature and measurement is done in reasonable distance to the object. |
Range of temperature measurement |
TIMP320 & TIMP640:
Normal temperature detection mode: -20 ~ 120℃
High temperature detection mode: 0 ~ 500℃
Medical mode: 20 ~ 50℃ |
Thermal camera set at normal temperature detection mode has better accuracy in measurement |
Control of focus/zoom |
TIMP series cameras include circuit for controlling lens motors for focusing and zooming respectively.
Thermal imaging analyzer for TIMP320 and TIMP640 has icons for focusing “+”/”-” and zooming “+”/”-”. |
TIMP series model itself controls lens motor for focusing and zooming, and no extra control board is not necessary for control of lens motors. |
System |
Video Output |
BNC connector(composite), HDMI |
|
Temperature
data output |
via Ethernet port(Giga E) |
|
Data refresh rate |
30Hz |
50Hz |
|
Video frame Rate |
BNC connector(composite): NTSC 30Hz, PAL 25Hz
HDMI: Selectable |
HDMI: 480p, 576p, 720p, 1080i,
1080p selectable |
Ethernet |
Giga Ethernet(10/100/1000Mbps) |
|
Lens |
4.8mm to 250mm lenses, manual/motorized focus, zoom |
Athermalized/Macro lens available |
PC Software |
TIMP320/640: Thermal imaging analyzer
Camera controller
Thermal report |
Thermal imaging analyzer for TIMP320/640(Multi-connection): In 2018. |
